Smart1.0
Smart Series is a new product line designed for applications where versatility as lightweight and small dimensions are essential while keeping great performance and high efficiency.
Smart1.0 is a full-range system, equipped with a 10-inch. woofer bass reflex loaded, combined with 1-inch compression driver. It’s a compact two-way powered loudspeaker systems providing excellent features.
To achieve best performance in terms of fidelity, output capability and coverage consistency across the audience it combines onboard state-of-the-art transducers and Powersoft amplifier module with a DSP programmable via remote control and at the same time allows networking connection. The management software Armonia-Pro audio suite allows to customize the sound based on the own specific needs and to upload 4 different standard presets for the most common applications.
Versatility is a key attribute of the Smart 1.0. It is designed to meet a multitude of premium stand-alone and distributed sound reinforcement requirements: theatre, touring and portable live sound applications, corporate events, concert hall. Ideal as the main PA in small-to-medium size rooms, it can also be used as an front/in/out-fill loudspeaker in large-scale systems supplemented by different subwoofers of the Smart Series. The simple and elegant lines with the special black’n’white design make this product interesting even in the permanent installations where the appearance together with the Loud Professional sound philosophy, can make the difference.
Smart Series: Smart1.2 || Smart1.5 || Sub1.8H || Sub2.5R || Sub2.8R
Products || VH Full-Range || VH Monitor || VH Line-Array || VH Subwoofer || VH Micro || Smart Series || FocusEight
Description |
Two-way active powered system |
Transducers: | 10in. Low-Mid Reflex |
1in. exit compression driver Mid-Hi Horn | |
Frequency range: | 80Hz-18kHz +/-4dB (-10dB @ 65Hz) |
Crossover points: | 1.6kHz |
Power handling: | LMF/MHF: 600/100 Watts Program |
Maximum SPL: | 124dB continuous, 130dB peak |
Nominal coverage: | 60°H/60°V (@-6dB point) |
Audio Input connectors: | Female XLR input, male XLR link outputNeutrik |
Mains connectors: | Powercons In & Out |
Amplifier module | |
Class: | Two channel switch mode, Class D |
Power supply: | Universal, regulated switch mode |
Nominal power requirement: | 100-240 V ±10%, 50-60 Hz |
Operating voltage: | 90V - 264V |
Thermal | 0°- 45°C - 32°- 113°F |
Audio | |
Gain: | 38 dB (voltage1 gain x40) |
Input sensitivity: | 11.15V / 3.43 dBu |
Max input level: | 15 dBu |
Frequency response: | 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω |
S/N ratio: | > 112 dB (20 Hz - 20 kHz, A weighted) |
THD+N: | < 0.05% from 1 W to full power (typically < 0.01%) |
IMD: | < 0.02% from 1 W to full power (typically < 0.005%) |
Input impedance: | 10 kΩ balanced |
Slew rate: | 50 V/μs @ 8Ω, input filter bypassed |
Damping factor: | > 500 @ 100 Hz |
DSP | |
AD Converter: | Dual 24 bit 48 kHz Tandem® architecture with 118 dBA S/N, THD < 0.02% (20 Hz - 20 kHz) |
DA Converter: | Dual 24 bit 48 kHz Tandem® architectureb with 115 dBA dynamic range, THD < 0.02% (20 Hz - 20 kHz) |
Internal precision: | 28 bit data path with 56 bit inner processing |
Firmware: | Update via ethernet port or RS485 |
Latency: | 0.644 ms fixed latency architecture |
Crossover: | Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct |
Delay: | up to 10 ms per output |
Limiters: | Peak limiter, RMS limiter, frequency dependent RMS limiter |
Enclosure Construction | |
Shell: | 18mm 13 Ply birch |
Finish: | Black or white Polyurea coated paint |
Grille: | Powder coated Steel |
Dimension | |
Height front: | 546mm(21.49") |
Height back: | 546mm(21.49") |
Width front: | 390mm(15.35") |
Width back: | 210mm(8.26") |
Depth: | 350mm(13,77) |
Net weight: | 23,5kg(51,80lbs) |
Integrated amplifier module |
|
|
|
Two channels professional amplifier with onboard DSP | |
|
|
|
On board Programmable DSP |
ProNET 485 Networking dialog card |
|
![]() |
Features << Dedicated Two-way Full-Range powered system<< Efficient Class D amplifier << Onboard programmable DSP, programming connector << Remote control & Networking << Four programmable DSP presets << Clip limiter and permanent signal limiter << Preset led and preset selector push button << Input volume potentiometer << Powercons In & Out <<
Portable Sound & light weight << Two handles & 8 x M8 threated inserts for easy setup << PCP Polyurea coated paint << Protection Bag << Accessories << |
Applications: Theatre || Congress || Club || Portable
The Company reserves the right to alter any specifications to the products and published documentations.