Loud Professional





The Smart Series is the next generation high performance powered loudspeaker system comprising three full range and three subwoofer models, expressly designed for all applications where versatility, compact dimensions and lightweight are essential, while keeping great performances and high efficiency with no compromise.
Smart Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary Loud Professional sound and performances.
Smart1.2 is a two way active full range system housing a 1.4in. (35.5mm) exit compression driver mounted on a 90deg. H x 60deg. V constant directivity horn and a 12in. (320mm) low-mid  transducer loaded in bass reflex enclosure.
The bass reflex optimized vented ports reduce turbulence and port noise at high levels while also increasing LF efficiency and extending the response down to 50Hz.
A class D four channels amplifier module provides an exceptional output power, specifically designed for two channels applications where high output voltage level is required, its 2 x 1500 W at 8 Ω (pair bridged) is the perfect engine to drive high power two-way full range systems and rock solid double subwoofers as the Smart Sub2.5R or Smart Sub2.8R.
Highest grade audio accuracy is guaranteed by fixed frequency switch mode output stage, avoiding any intermodulation artifact, and by the new "Control Plus" board allowing to achieve +6 dB more in terms of Signal-to-Noise Ratio.
The Smart amplifier module is an extremely compact solution: power supply, output stage, DSP board and connectors are all included in a single, small, lightweight and protected chassis, and the perfect compatibility with the other Smart Series products allows to minimize efforts for mechanical development of different products.
As for all Smart products, the Smart1.2 amplifier module is shaped and controlled using the DSP boards available to design the sound of the loudspeaker with a large set of processing algorithms.
To achieve best performance in terms of fidelity, output capability and coverage consistency across the audience it combines onboard state-of-the-art transducers and Powersoft amplifier module with a DSP programmable via remote control and at the same time allows networking connection.
The management software Armonia-Pro audio suite allows to customize the sound based on the own specific needs and to upload 4 different standard presets for the most common applications.
Versatility is a key attribute of the Smart1.2.
It is designed to meet a multitude of premium stand-alone and distributed sound reinforcement requirements: theatre, touring and portable live sound applications, corporate events, concert hall.
Ideal as the main PA in small-to-medium size rooms, it can also be used as an front/in/out-fill loudspeaker in large-scale systems supplemented by different subwoofers of the Smart Series.
The simple and elegant look with its special "black’n’white" design make this product interesting specially in permanent installations where appearance combined with the Loud Professional sound signature, can make the difference!
The Smart1.2 can be pole-mounted using the box integrated socket.
A complete range of rigging accessories make easier and faster other deployments such as wall-mounted, ceiling-mounted or stacked offering multiple set-up options and various orientations.
The system can also be suspended using three M8 threaded inserts (three on the top/bottom panel and two on the rear panel). 
Great performances, compact dimensions and lightweight make the Smart1.2 incredibly smart & portable broadening the applications range, specially in mobile solutions.
Significant construction criteria, combined with the latest technologies and innovative materials, ensure a great reliability. 
The Smart1.2 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. 
The system can be as well matched with the Loud Professional Smart Subwoofers range, boosting its LF extension.
Applications: Theaters, Conference Halls, Concert Halls, Large Scale Discos, Clubs & Bars.


Smart Series: Smart1.0 || Smart1.5 || Sub1.8H || Sub2.5R || Sub2.8R


Products || VH Full-Range || VH Monitor || VH Line-Array || VH Subwoofer || VH Micro || Smart Series || FocusEight



Two-way active powered system

Transducers: 12in. Low-Mid Reflex
  1.4in. exit compression driver Mid-Hi Horn
Frequency range: 65Hz-18kHz +/-4dB (-10dB @ 55Hz)
Crossover points:


Power handling: LMF/MHF: 1.200/200 Watts Program
Maximum SPL: 127dB continuous, 133dB peak
Nominal coverage: 90°H/60°V (@-6dB point)
Audio Input connectors: Female XLR input, male XLR link outputNeutrik
Mains connectors: Powercons In & Out
Amplifier module  
Class: Two channel switch mode, Class D
Power supply: Universal, regulated switch mode
Nominal power requirement: 100-240 V ±10%, 50-60 Hz
Operating voltage: 90V - 264V
Thermal 0°- 45°C - 32°- 113°F
Gain: 38 dB (voltage1 gain x40)
Input sensitivity: 11.15V / 3.43 dBu
Max input level: 15 dBu
Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio: > 112 dB (20 Hz - 20 kHz, A weighted)
THD+N: < 0.05% from 1 W to full power (typically < 0.01%)
IMD: < 0.02% from 1 W to full power (typically < 0.005%)
Input impedance: 10 kΩ balanced
Slew rate: 50 V/μs @ 8Ω, input filter bypassed
Damping factor: > 500 @ 100 Hz
AD Converter: Dual 24 bit 48 kHz Tandem® architecture with 118 dBA S/N, THD < 0.02% (20 Hz - 20 kHz)
DA Converter: Dual 24 bit 48 kHz Tandem® architectureb with 115 dBA dynamic range, THD < 0.02% (20 Hz - 20 kHz)
Internal precision: 28 bit data path with 56 bit inner processing
Firmware: Update via ethernet port or RS485
Latency: 0.644 ms fixed latency architecture
Crossover: Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct
Delay: up to 10 ms per output
Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
Enclosure Construction  
Shell: 18mm 13 Ply birch
Finish: Black or white Polyurea coated paint
Grille: Powder coated Steel
Height front: 660mm(25.98")
Height back: 660mm(25.98")
Width front: 410mm(16,14")
Width back: 230mm(9,05")
Depth: 350mm(13,77)
Net weight: 27,5kg(60,62lbs)



Integrated amplifier module


Amp. module



Two channels professional amplifier with DSP on board













Smart Series





Smart Series Rear view


On board Programmable DSP

ProNET 485 Networking dialog card

RS232 USB converter




Technical Drawing || Product Code70002


Features <<

Dedicated Two-way Full-Range powered system <<

Onboard programmable DSP, programming connector <<

Remote control & Networking <<

Four programmable DSP presets <<

Clip limiter and permanent signal limiter <<

Preset led and preset selector push button <<

Input volume potentiometer <<

Powercons In & Out <<

  • 2 XLR connectors for mono input + link output <<

Portable Sound & light weight <<

Two handles & 8 x M8 threated inserts <<

PCP Polyurea coated paint <<

Protection Bag <<

Accessories <<


Applications: Theatre || Congress || Club || Portable


The Company reserves the right to alter any specifications to the products and published documentations.