Loud Professional

Smart Sub2.8R

Smart Sub2.5R

 

 

The Smart Series is the next generation high performance powered loudspeaker system comprising three full range and three subwoofer models, expressly designed for all applications where versatility, compact dimensions and lightweight are essential, while keeping great performances and high efficiency with no compromise.
Smart Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary Loud Professional sound and performances.
Smart Sub2.5R is a double actively subwoofer system, housing two 15in. (380mm) long excursion transducer loaded in separated bass reflex enclosures.
The optimized vented ports reduce turbulence and port noise at high levels while also increasing LF efficiency and extending the response down to 35Hz.
A class D four channels amplifier module provides an exceptional output power, specifically designed for two channels applications where high output voltage level is required, its 2 x 1500 W at 8 Ω (pair bridged) is the perfect engine to drive high power rock solid double subwoofers as the Smart Sub2.5R or Smart Sub2.8R.
Highest grade audio accuracy is guaranteed by fixed frequency switch mode output stage, avoiding any intermodulation artifact, and by the new "Control Plus" board allowing to achieve +6 dB more in terms of Signal-to-Noise Ratio.
The Smart amplifier module is an extremely compact solution: power supply, output stage, DSP board and connectors are all included in a single, small, lightweight and protected chassis, and the perfect compatibility with the other Smart Series products allows to minimize efforts for mechanical development of different products.
As for all Smart products, the Smart Sub2.5R amplifier module is shaped and controlled using the DSP boards available to design the sound of the loudspeaker with a large set of processing algorithms.
To achieve best performance in terms of fidelity, output capability across the audience it combines onboard state-of-the-art transducers and Powersoft amplifier module with a DSP programmable via remote control and at the same time allows networking connection.
The management software Armonia-Pro audio suite allows to customize the sound based on the own specific needs and to upload 4 different standard presets for the most common applications.
Versatility is a key attribute of the Smart Sub2.5R.
It is designed to meet a multitude of premium stand-alone and distributed sound reinforcement requirements: theatre, touring and portable live sound applications, corporate events, concert hall.
Ideal as the main PA in small-to-medium size rooms, it can also be used as an front/in/out-fill/drum-fill loudspeaker in large-scale systems supplemented by different full ranges of the Smart Series.
The M20 threaded insert integrated adapter on top panel allows the Smart full range to be stacked on. 
Great performances, compact dimensions and lightweight make the Smart Sub2.5R incredibly smart & portable broadening the applications range, specially in mobile solutions.
Significant construction criteria, combined with the latest technologies and innovative materials, ensure a great reliability. 
The Smart Sub2.5R cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. 
The system can be as well matched with the Loud Professional Smart full ranges, boosting their LF extension.
Applications: Theaters, Conference Halls, Concert Halls, Large Scale Discos, Clubs & Bars.

 

 

Smart Series: Sub1.8H || Sub2.5R || Smart1.0 || Smart1.2 || Smart1.5

 

Products || VH Full-Range || VH Monitor || VH Line-Array || VH Subwoofer || VH Micro || Smart Series || FocusEight

 

Description

Powered vented subwoofer

Transducers: Twins 18in. long excursion subwoofer reflex loaded
   
Frequency range: 35Hz-1kHz +/-4dB
Crossover points:

HPF-LPF: 30Hz-80/90/100/110Hz (selectable presets)

Power handling: LF1+LF2: 1050+1050 Watts Program
Maximum SPL: 134dB continuos 140dB peak
Nominal coverage: Omni
   
Audio Input connectors: Female XLR input, male XLR link outputNeutrik
Mains connectors: Powercons In & Out
   
Amplifier module  
Class: Two channel switch mode, Class D
Power supply: Universal, regulated switch mode
Nominal power requirement: 100-240 V ±10%, 50-60 Hz
Operating voltage: 90V - 264V
Thermal 0°- 45°C - 32°- 113°F
   
Audio  
Gain: 38 dB (voltage1 gain x40)
Input sensitivity: 11.15V / 3.43 dBu
Max input level: 15 dBu
Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio: > 112 dB (20 Hz - 20 kHz, A weighted)
THD+N: < 0.05% from 1 W to full power (typically < 0.01%)
IMD: < 0.02% from 1 W to full power (typically < 0.005%)
Input impedance: 10 kΩ balanced
Slew rate: 50 V/μs @ 8Ω, input filter bypassed
Damping factor: > 500 @ 100 Hz
   
DSP  
AD Converter: Dual 24 bit 48 kHz Tandem® architecture with 118 dBA S/N, THD < 0.02% (20 Hz - 20 kHz)
DA Converter: Dual 24 bit 48 kHz Tandem® architectureb with 115 dBA dynamic range, THD < 0.02% (20 Hz - 20 kHz)
Internal precision: 28 bit data path with 56 bit inner processing
Firmware: Update via ethernet port or RS485
Latency: 0.644 ms fixed latency architecture
Crossover: Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct
Delay: up to 10 ms per output
Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
   
Enclosure Construction  
Shell: 18mm 13 Ply birch
Finish: Black or white Polyurea coated paint
Grille: Powder coated Steel
Dimension  
Height front: 1140mm(44.88")
Height back: 1140mm(44.88")
Width front: 576mm(22.67")
Width back: 576mm(22.67")
Depth: 730mm(28.74")
Net weight: 94kg(207.23lbs)
 

Powersoft

 

Integrated amplifier module

 

Amp. module

 

 

Two channel professional amplifier with DSP on board

 

 

 

 

 

 

 

Smart1.2

 

 

 

 

Smart Series

 

Smart Series Full-Range

 

 

 

 

 

 

Technical Drawing || Product Code70006

 

Features <<

Dedicated Sub-bass powered system <<

Efficient Class D amplifier <<

Onboard programmable DSP, programming connector <<

Remote control & Networking <<

Four programmable DSP presets <<

Clip limiter and permanent signal limiter <<

Preset led and preset selector push button <<

Input volume potentiometer <<

Powercons In & Out <<

  • 2 XLR connectors for mono input + link output <<

Portable Sound & light weight <<

Four handles for easy setup <<

PCP Polyurea coated paint <<

Protection Bag <<

Accessories <<

 

Applications: Theatre || Congress || Club || Portable

 

The Company reserves the right to alter any specifications to the products and published documentations.